Residential Aluminum Sliding Glass Doors , aluminum sliding folding doors

Aluminium Folding Tempered Glass Sliding Glass Door System

Aluminum folding door:

A folding door is a type of door which opens by folding back in sections

Folding Doors Advantages by aluminium alloy

Folding door is one the most popular and versatile door type today. It is optimum for every type of appearance either traditional or contemporary.

Folding door is a perfect solution when an open living space is required. Folding doors provide a seamless transition from indoors to the outdoors and allow folding the door partitions right in or out and enable to open even more space. It has the following advantage:

1) Large Space Appearance: Living room space is one of the biggest problems for millions of homeowners, and it amplifies with conventional door.

By having bi fold doors in your home or living room you can create much brighter and larger living space. Just by pushing the entire Folding door to one side you can enhance the room space which was occupied by the conventional door.

2) Safer Children Play: Children love to play outside of the home but we don’t allow them to do this unsupervised. By having a bi fold door, you can keep it open and keep a close eye on them.

3) More Air Inflow: The insufficient air flow in the living room makes it annoying. In the summer living space becomes more uncomfortable due to this. Aluminium Bfold doors can make a better air flow your home.

4) Cheaper Electric Bills: folding doors provide a wide opening with more natural light and air into your house, which automatically reduces the use of lights and air conditioners and save a good amount on your electric bills.

5) Modern Appearance: The folding doors are excellent at appearance aspect, it provides contemporary and traditional feel according to your needs. And the best thing is that you won’t have to spend an absolute fortune to get these results

Specification:

--- PRODUCT SHOW---

Heat insulation broken bridge aluminum alloy frame:

Aluminium alloy of the heat insolation of advantages:

1. Energy saving: the remarkable energy saving effect of K value of 2.0 to 3.0 w/m2k energy-saving thirty percent to 40.

2. The sound insulation, good sound insulation performance, reduce noise 30-50 db

3. Insulation: condensation coagulate frost prevention function, the window clean and bright

4. High intensity, wind resistance performance after reach the standard level 1

5. Good air tightness, reach the standard level 1

6. 3 room design principle, high stability, mechanical performance is excellent, middle seal design, double sealing effect

Our Advantages:

We have the building glass factory and the aluminum alloy profile & window factories

So we can promise the good price and good quality

Total 24 extrusion lines

10building glass production lines,

12 aluminum alloy profile production lines

10 window production lines

Surface:

1. The principle of electrophoresis technology

The electrophoresis is basically the same as the traditional light and transparent electrophoresis. The anode electrophoresis is carried out under the action of direct current. With the action of the electric field, the coated particles with charge are moved to the coated workpiece, which precipitates the electrophoresis coating deposited on the surface of the aluminium profile, forming a layer of film. The difference lies in the different types of coatings and the slightly different devices.

The electrophoretic coating includes acrylic resin, melamine resin, pigments, solvents, neutralizing agents, additives and other ingredients. Through the application of thermal fixing in the viaduct layer in the particle, the shape of the micro-concave coating during the process of baking was basically unchanged in the baking process, and the appearance of the film was formed uniformly. The degree of extinction can be adjusted by the ratio of high gloss paint and low gloss paint.

For profile color, due to the transparency of coating, the color of the product depends on the electrolytic coloring. The color of the profile can also be added to color, white, ivory, green, red, ash, etc., by selecting the color aluminum profile required by adding color pulp. The surface quality is better than spray.

2. Excellent performance of products

high transparency and full measure, with special gloss and transparency, the coating has a high stereo effect, and the color of the substrate is obvious.
the high hardness, when the temperature of 180 ℃ baking 30 min, hardness can be up to 4 to 5 h.
good level of flow, strong paint film, and smooth film.
with strong binding force and penetration, the coating is all-pervasive, and the wet film and dry film have a strong binding force.
the performance is good, resistance to discoloration and corrosion when the baking temperature of 180 ℃ ~ 200 ℃ workpiece does not change color, lasting bright color products, corrosion effect is perfect.
the average of the electrophoresis is good, the paint film is evenly flat, and can reach 10-16 um in 90-200v, high efficiency, and low power consumption.
good impact resistance and artificial sweat resistance.
it can be used for the surface protection of aluminum, metal electroplating, precious metal accessories, lamps and high-end furniture.
it can be electrophoresis with various color slurry: titanium gold, general grey, real black and other colors. due to the superior screening rate of the matte electrophoresis coating, the extrusion mold pattern on the surface of the aluminum material has a certain degree of masking effect.And for the color difference of the dying process, it has a certain degree of compensation effect.

3. The principle and application of paint extinction

With electrophoresis coating technology development, in the coating industry in China, also become the world’s top coating production, forming a related industry group, and actively promote the technological revolution and development of traditional painting domain. During this period, the bright and bright gloss paints are popular with consumers with their bright colors and bright colors, and in a long time, the coating market. However, as people’s living standard has been improved, on the one hand, consumers have felt that the high gloss coating is more serious than the reflection, which is harmful to people’s eyes. On the other hand, the aesthetic concept of consumers is more and more casual, fashionable and personalized. Coupled with the booming demand of China’s electronics and appliance industries. These factors led to a sharp increase in demand for low-gloss coatings with a soft appearance. At the same time, it is necessary to consider how to produce paint with matte performance.

3.1.1 Determination of gloss and luster

The light that is projected onto the surface of the object will reflect the light, and the surface of the object will be reflected in the light. Different surfaces have different gloss, measuring the size of the surface of the light reflected by the light, called glossiness. The gloss is expressed as a percentage, the higher glossiness of the surface, the greater the ability to reflect light and the higher the brightness. The size of the gloss is measured by the photoelectric gloss meter. According to the size of the gloss, the coating can be divided into light, sublight and weak light. Classification of gloss of coatings (with 60 reflections) :

Weak light: gloss less than 10%;
Sublight: gloss 10 ~ 60%;
Light: glossiness > 60%.

Please tell us the information below, and we will give the best suggestion to you !

1. Where you intend to use the aluminium windows?

2. If you have the estrusion drawing, send us and we develop the correspondence mold.

3. Which color you want or tell us the architectural style you like.

4. Purchase quantity. It will convenient us to give you the best price.