Deep Grey Aluminium Sliding Internal Door Crimsafe Mesh For Apartment

KTD55 Series Aluminium Sliding Internal Door With Entrance Glass Slim Frame

Application of Slim Frame Aluminum Sliding Door:

Everyone's love for sliding door is very reasonable. Who makes it look good and saves space~
And there are not too many places to use. It can be used in open kitchens and balconies.
It can even be used in bedrooms and bathrooms. Except that it is difficult to use as an entry door, other doors can be considered.
Semi open kitchen
Closed kitchen, no sense of permeability, and cooking alone, too lonely.
And because of the oil fume problem, I dare not choose the open kitchen.
If you want to be transparent and don't want the oil smoke to spread all over the house, you can try the glass partition door.
balcony
Between the living room and the balcony, the frequency of sliding doors is also very high.
After all, electricity is also very expensive. There is a thing across the room. In summer, it takes less time to turn on the air conditioner to cool down.
other
In addition to being used in kitchens and balconies, sliding doors can also be used in other places instead of swing doors.
For example, sliding doors can be installed in the bathroom, but friendly tips: sliding doors are not very good in terms of sound insulation and smell. Choose carefully.
Sliding doors can also be used in the cloakroom and wardrobe, which is convenient and has high appearance value.

Glass Description

Double layer insulating glass
Insulating glass is to separate two pieces of glass by effective sealing material and spacer material, and a desiccant absorbing water vapor is installed between the two pieces of glass, so as to ensure that the inner part of insulating glass is a dry air layer for a long time, without water vapor and dust; At the same time, insulating glass is easy to carry out mass industrial production, so insulating glass is widely recommended in new buildings.
Two pieces of flat glass are isolated by molecular sieve, filled with dry air in the middle and sealed by organic adhesive around.
It has good heat insulation and sound insulation performance, and can be used as windows for buildings, refrigerated cabinets, railway vehicles, etc.

Basic knowledge of insulating glass
Insulating glass aluminothermic process
Double layer insulating glass
Double layer insulating glass
Aluminum is called active metal element, but in the air, a dense oxide film will form on its surface, which makes it unable to interact with oxygen and water. At high temperature, it can react with oxygen and release a lot of heat. With this high reaction heat, aluminum can replace metal from other oxides (aluminothermic method).
Insulating glass desiccant
Insulating glass desiccant is mainly used for absorbing moisture and gas in insulating glass interlayer gas to avoid glass fogging, keep insulating glass smooth and transparent even at very low temperature, improve insulating and sound insulation performance of insulating glass, and fully extend service life of insulating glass.
Insulating glass - sealant
(1) Anti gas leakage ability( 2) Resistance to water vapor penetration( 3) Anti ultraviolet ability( 4) Anti seepage ability( 5) Bonding system is structural.