Anodized Aluminium Sliding Windows Vertical Clear Tempered Glass 8mm Thickness

1. Push and pull window advantages

Push and pull window does not occupy indoor and outdoor space, can control the open area at will, and it is easy to operate, and it is suitable for windowsill. Folding open doors and windows are suitable for large area of space. When opening and closing, doors and windows slide along the track, and the operation is light.

2, What is the difference between the upper and lower sliding windows and the open windows

The aluminum alloy doors and windows are classified according to their opening modes. At present, the most popular and practical window types in the market need to be pushed and pulled and flat. Flat window refers to the door and window which is installed on the side of the door and window which is closed with hinge to open inward or outward; push and pull door and window mainly refers to the window sash which is pushed vertically and horizontally to the left and right. Push pull and flat opening have their own advantages in the case of using the same glass and accessories.

The difference between the flat window and push-pull window is mainly in the collocation with the overall style of the building. Because of its flexibility in dividing the window, the flat window can make the facade effect of any line. For the large divided floor window, the opening fan only accounts for a small part of the whole window, so it is more suitable for the high-grade buildings with strict overall effect requirements, which conforms to the requirements of the overall effect of the building The architecture that architects pursue is large division, spacious and bright, good penetration effect and smooth appearance. The sliding window can only be pushed horizontally because of its opening position, so it is difficult to match the fixed glass with large divisions. Generally, it is suitable for the opening workshop with clear vertical lines or rural family buildings. In the three performance of doors and windows (wind pressure resistance, water tightness, air tightness), flat windows are generally better than push-pull windows.

In the process of using the push and pull window, there are disadvantages and advantages, but the relative advantages are larger than the disadvantages, so the use range is relatively wide. Generally, windows must have wind pressure resistance, that is to say, they can resist the general wind, and there is a certain degree of tightness. Otherwise, when it rains outside, it will rain in. Another is that the windows should be air tight, and the indoor temperature can be protected or the insulation effect can be achieved when it is needed. Push and pull windows are similar to other price windows, and push and pull windows are easy to use, so the market scope is much more than other windows.

Sliding windows can be divided into horizontal sliding windows and vertical sliding windows according to different sliding directions. The horizontal sliding window needs to be set with rail groove above and below the window sash, and the vertical sliding window needs pulley and balance measures.
Sliding window has the advantages of not occupying indoor space, beautiful appearance, economical price and good sealing. Using high-grade slide rail, gently push, open flexible. With large pieces of glass, it not only increases the indoor lighting, but also improves the overall appearance of the building. The stress state of the window sash is good and not easy to damage, but the ventilation area is limited.

1. After the installation of doors and windows, the protective film on the profile surface should be removed in time and cleaned; otherwise, a large number of protective film gum will remain on the profile, which is difficult to clean.
2. In windy days, the casement should be closed in time.
3. Heavy objects cannot be hung on the handle of casement window.
4. The swing window can be opened differently by changing the direction of the switch handle. We should know how to operate it to avoid damage.
5. When the sliding window is in use, the sliding track should be cleaned frequently to keep it clean, so that there are no hard particles in the track surface and groove.
6. Plastic steel doors and windows are equipped with drainage system in the window frame, window sash and other parts to ensure the air tightness and water tightness of doors and windows. Users should not block the drainage holes of doors and windows in the process of use, so as not to reduce the drainage performance of doors and windows.
7. When pushing and pulling the window, the force point should be in the middle or lower position of the window sash. Do not use too much force when pushing and pulling, so as not to reduce the service life of the window sash.
8. The gauze fan can remove the fixed gauze strip by itself, take down the gauze net and clean it with water-soluble detergent respectively.
9. When using the yarn fan of the sliding window, please pay attention to the coincidence with the vertical frame of the inner rail sliding fan, which can maintain good sealing.